【产品供应】供应A接口协议分析仪 MPA7300

场信令仪(多路协议分析仪、 A接口协议分析仪、A接口信令分析仪)
MPA7300 MPA7200 MPA7100

厂家 GN Nettest

官网介绍   详细介 绍 PDF

包含 所有主要的电信协议：SS7, DASS2, DPNSS, BTNR167, GSM, ETSI Q931, INAP 等 等.

◆系统软、硬件 性能非常稳定，应用极其广泛，技术服务全面专业

◆先进的硬件结构（前后台处理分开）， 超大容量处理能力（上百小时不间断记录）保证数 据处理快速可靠，昼夜不间断

◆所有规程 同时解码，跨链路实时跟踪呼叫，保证快速故障定 位

◆自动识别信令及消息序列错误，给出 告警

◆智能化自动搜索信令时隙

◆ 多种应用：信令配合、呼叫追踪、接通率分析、呼 损分析、网络规划、GSM网络优化，MAP层增值业务 开发、网关计费验证，欺诈检测、网络告警监测等

◆ODBC开放数据库格式及中文界面

◆中文操作界面仿真设计 提供友好的人机交互界 面，系统操作简单易学。

系统标准配置

Us ed for acceptance testing, detailed trouble shooting, daily maintenance and performance analysis of telecoms networks and switches.

多达10种协议同 时分析。Easy to use multi-link instrument with true multi-protocol analysis capability for up to ten protocols simultaneously.

Ability to store 1GB of data with 1ms resolution, filter trigger and perform sequence recording for easy analysis.

协议分析

协议分析功能捕获发出的 信号单元并以解码的形式显示。The protocol- analysis function captures signaling units and displays them in decoded form. The captured signaling units in the log are time-stamped with a resolution of 1 millisecond. The MPA 7300provides full correlation of signaling information recorded from all connected signaling links. Different protocol descriptions may be associated with the various signaling- link interfaces. National protocol descriptions can easily be customized. Automatic error recognition The unique MPA 7300 expert system automatically recognizes all invalid signaling messages and sequences (all valid messages and sequences are contained in the protocol description). In case of a signaling error (syntax error, messages out of sequence or timeout between two messages), the collected events will be stored with an error message in the log.

滤波器

In this context, filtering means controlling which signaling messages/sequences and alarms are stored in the event log. An event recognizer in the MPA 7300 is a mechanism that allows the user to look for individual signaling messages and alarms with a specific content – e.g. ISUP RELease messages with cause 17 “user busy”. Sequence recognizers are used to capture a complete sequence of events forming a meaningful transaction – e.g. a telephone call or a Service 800 IN transaction. Both event recognizers and sequence recognizers can be used as filter conditions. The user can select from a wide range of predefined “click-and-go” events and sequence recognizers. Up to 500 concurrent calls/transactions can be followed by a sequence recognizer.

触发 类型

The MPA contains two trigger types: One start trigger for enabling (open) storage of events and one stop trigger for disabling (close). An event recognizer can be selected as start trigger. A timing offset or event-number offset can also be specified before the event recognizer.

• Replacement for the successful ETP-71 protocol analyser
• Used for acceptance testing, detailed trouble shooting, daily maintenance and performance analysis of telecoms networks and switches
• Easy to use multi-link instrument with true multi-protocol analysis capability for up to ten protocols simultaneously
• Incorporates a Windows® GUI with pentium processor, 10.4" screen and remote control capability
• Includes all major telecoms protocols such as SS7, DASS2, DPNSS, BTNR167, GSM, ETSI Q931, INAP etc
• Ability to store 1GB of data with 1ms resolution, filter trigger and perform sequence recording for easy analysis

电话 010 - 62123259   QQ:52634729    北京海 淀区大柳树路富海中心4号楼105室